home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip: Special Tips & Tricks for Windows 95
/
Chip Wintips.iso
/
sterown
/
grafika
/
9440_2
/
nt35
/
readme
< prev
next >
Wrap
Text File
|
1996-09-11
|
3KB
|
82 lines
***********************************************************************
WINDOWS NT DRIVER SETUP INFORMATION
for
Trident 94x0 AGi Users
***********************************************************************
Windows NT Device Drivers Version 1.01 Jul. 12, 1995
***********************************************************************
Contents
1.0 Introduction
2.0 Supported Resolutions
3.0 Installation Notes for Windows NT Version 3.5
*****************************
1.0 Introduction
This Accelerate Driver runs on the following products:
Trident 94x0 AGi, VESA or PCI local bus adapter
The Graphics Device Drivers supplied here are for the Microsoft
Windows NT operating system version 3.5.
*****************************
2.0 Supported Resolutions.
16 colors 256 colors 65000 colors 16.7 million
Resolutions 4 bpp 8 bpp 16 bpp 24 bpp
640 x 480 0.5/1/2MB 0.5/1/2MB 1/2MB 1/2MB
800 x 600 0.5/1/2MB 0.5/1/2MB 1/2MB 2MB
1024 x 768 0.5/1/2MB 1/2MB 1/2MB N/A
1280 x 1024 1/2MB 2MB N/A N/A
1600 x 1200 1/2MB 2MB N/A N/A
.5/1/4MB - Supported on 0.5, 1 or 2 Megabyte trident 94x0 AGi products
N/A - Not Supported
****************************
3.0 Installation Notes for Windows NT
This driver package containing:
- AGI.SYS (Trident AGi graphics miniport driver)
- AGI.DLL (Trident AGi graphics display driver)
- OEMSETUP.INF (setup files used by Windows NT Setup program)
- README This README file for Windows NT Version 3.5
Windows NT drivers are included on Disk #2 of this package. They are
located in the \NT35 sub-directory.
Procedure:
1. Run the Windows NT display Setup program located in the Control Panel, Main
group.
2. Select "Change Display Type..." button from the Display Settings options.
3. Select "Change..." button from the Display Type options.
4. Select "Other..." button from the Select Device options.
5. Windows NT will prompt you for the correct path. Enter A:\NT35 if disk 2
is loaded in drive A:.
6. A list of modes will appear, select the resolution and color
depth desired.
7. Restart Windows NT. Windows NT will start up using the trident AGi drivers.
Note: If a color depth or resolution that is not supported by your
card is selected, Windows NT will substitute 640x480, 256 colors mode
as the current display mode.